Was sind die wesentlichen Details zur Farbboxverpackung von LED -Leuchten?

Farbkästen sind eine herausragende Art von Verpackung, die ausgiebig verwendet wird. Bei der Bereitstellung von Zitaten für unsere Kunden, Wir schließen es häufig als Standardangebotsbedingung ein. Wenn Artikel im Zielland ankommen, Farbkästen sind als individuelle Verkaufsverpackung vorteilhaft und können Produkte während des Transports schützen: 1.

1. Niedriger Preis

Farbkästen sind günstiger als Blasenverpackung, Dies macht es einfach, die Kosten unter Kontrolle zu halten.

2. weit verbreitete Verwendung

Farbkästen sind ideal für eine Vielzahl von Verwendungen, einschließlich Supermärkte, Postanweisungen, E-Commerce-Kunden, und Werbemaßnahmen.

3. Einfach zu inspizieren und zu ersetzen

Wenn die Produktqualität untersucht werden muss, Farbboxverpackungen können wiederverwendet werden, im Gegensatz zur Papierkarte + Blasenverpackung. Wenn es einen Fehler gibt, Es ist auch einfach, den Text im Farbfeld zu ersetzen.

4. Im Vergleich zu Plastik, Recyclingpapierprodukte sind umweltfreundlicher.

Global, Nationen werden immer ökologisch empfindlicher, und einige haben sogar Gesetze verabschiedet, die die Menge an Kunststoff diktieren, die in der Produktverpackung verwendet werden muss. Die Papierverpackung verringert die Möglichkeit von Verpackungsverletzungen.

Die Schritte, die mit einer Farbkasten verbunden sind

Weiße Kisten, Versandkästen, und Geschenkboxen werden häufig alle als Farbboxen eingestuft, da sie eine ähnliche Struktur haben, sich jedoch nur geringfügig in Farbe und Schreiben unterscheiden.

1. leere Kisten

Die Schachtel ist weiß, Wie vorgeschlagen unter seinem Namen. Die Box, das wird häufig zum Angeben von Kunden verwendet, wird mit einigen wichtigen Kundendaten gedruckt, wie die Artikelnummer, Barcode, usw.

2. Kisten für Postanweisungen

The majority of mail-order boxes are brown, with a few being white. They are frequently used for mail-order and e-commerce consumers.

3. box in color

The white box now has coloured printing. Keep in mind that the color box design should, to the greatest extent feasible, be in CMYK format so that the discrepancy between the design and the actual printing cost will be minimal.

4. Present Boxes

Box material color

Surface paper and pit paper are the two categories into which the components of color boxes fall.

1. Pink and gray paper, gray copper, white copper, single copper, magnificent card, gold card, platinum card, silver card, laser card, kraft paper, usw. are examples of top papers that are frequently used.

Whiteboards with a white background come in two varieties: single copper and white copper. Die Tatsache, dass sie beide vorne und hinten weiß sind. Der Druck ist nur auf der Vorderseite des Papiers zulässig. Single Kupfer hat eine beschichtete Oberfläche sowohl auf der Vorder- als auch auf der Rückseite, und beide können gedruckt werden.

Beide Seiten von Doppelpulverpapier sind weiß, Aber der Preis ist höher. Pudergraupapier hat eine Seite, die weiß und eine Seite grau ist. Typischerweise, 250G bis 450 g pulvergrauer Papiermaterial wird häufig verwendet. Beschichtetes Papier wiegt normalerweise 250 bis 400g.

2. Pitpapier verfügt über ein grundlegendes Gerüst aus zwei Arten von Papier: Glattes Kraftpapier und welliges Papier, die gemeinsam als Papierkern bezeichnet werden. Normalerweise dazwischen 120 und 160g, aber möglicherweise auch 200g. Die Dicke des Kerns hat zuvor von von 130 bis 160g zu 100 bis 140g, und es wird vollständig aus Abfallpapier hergestellt.

Opp -Beutel oder Bubble -Beutel werden häufig in Verbindung mit einer einzelnen Papierschicht verwendet, wenn das Produkt einigermaßen kompakt und robust ist. Wenn

Eine oder mehrere Schichten von Wellpapier sind auf mehrere Boxboard -Blätter eingehalten oder eingelassen, um ein Wellblatt zu erstellen. Einfach gesagt, Es hat eine Polsterung und einen schockdichten Effekt. Wellblechkästen sind aus diesem Grund stark und belastbar.

Die Art und Weise, wie farbenfrohe Kisten verpackt sind

Im täglichen Leben, Die Rohrbox ist die am weitesten verbreitete Art der Verpackung. Der Großteil der Farbkästen, einschließlich derjenigen für Lebensmittel, Medikamente, und alltägliche Gegenstände, Verwenden Sie diese Art der Verpackung. An der Seite der Box befindet sich ein klebriger Mund, und die grundlegende Form des Kartons ist ein Vierecker, Dies kann auf dieser Grundlage auf ein Polygon erweitert werden. Zu den Eigenschaften gehören die Notwendigkeit, den Deckel und den Boden der Box während des Formprozesses zu reparieren oder zu versiegeln, indem die Flügel geschüttelt und gefaltet werden (oder kleben), Die Tatsache, dass die meisten von ihnen monolithische Strukturen sind (Die Entfaltungsstruktur ist eine Ganze), und die Tatsache, dass die meisten von ihnen monolithische Strukturen sind. Die Art und Weise, in der der Deckel und der Boden der tubulären Kisten zusammengestellt werden, spiegelt hauptsächlich die Unterschiede in ihren strukturellen Eigenschaften wider.

Normale Top -Deckel -Verriegelungstechnik

Wir empfehlen, dass dieser Einsatzmodus eine kugelförmige Paste enthalten muss, um die Steifheit für die grundlegendste Mundmethode zu gewährleisten.

Doppelversicherungstyp mit einem rockigen Deckel

Diese Struktur macht den rockigen Deckel sehr solide und unterliegt einem doppelten Biss. Der rockige Deckel und der Mund des Bissens der Deckel können ebenfalls übersprungen werden, erleichtert das Wiederholen der Öffnung der Verwendung mehrmals.

Art der Mundsperrung

Die durch diese Konstruktion erzeugte Einsatzverriegelung durch die Vorder- und Rückseite der beiden Seiten der Schaukelkappe, die miteinander interagiert, Aber Montage und Öffnung sind ein wenig herausfordernd.

Einweg-Einweg-Typ

Die Beschäftigung von zahnförmigen Schneidlinien, Dies kann Schäden an der Verpackungsstruktur verursachen, wenn der Verbraucher die Box öffnet und die Wiederverwendung für illegale Aktivitäten verbietet, charakterisiert diese Form der Verpackungskonstruktion.

Setzen Sie den selbstverriegelten Boden aus.

Sie müssen mit den vier schwingenden Flügeln an der Basis der Tubularkiste ineinander beißen. It has some load-bearing capacity and is simple to assemble. It should be mentioned that consumers frequently choose to print the barcode on the bottom of the box. It is typically utilized for the bottom of coloured boxes. It should be remembered that after the insert is finished, the barcode cannot be blocked because doing so will make it difficult for buyers to scan the code.

Common color box surface treatments

If no surface treatment is applied, the printed materials will quickly fade when exposed to ultraviolet light since the face paper of color box printing is printed with ink. The color box becomes smoother and brighter after being laminated or oiled. It also serves as moisture-proof, water-proof, stain-proof, wear-resistant, usw., and increases the color box’s useful life.

1. Coating

a. lustrous film

The printed content is more difficult to remove from a box covered in glossy film, and the box will be more sturdy.

Matrix film

The matte film will give the box a more modern appearance, but it has the drawback of making the box surface more vulnerable to scratches, necessitating more care during packaging and shipment.

2. oiling

White boxes in general can opt for oiling, which will result in a minor price reduction. The same can contribute to increasing the service life of the color box by reducing scratches, color loss, and soiling.

When laminating, different substrates require different temperatures. If the laminating substrate is gold cardboard, the laminating steel roller’s temperature should be kept between 70 Und 80 degrees Celsius; if it’s 250 oder 300 grams per square meter of gray whiteboard paper, the temperature should be between 80 Und 90 degrees Celsius. Whiteboard paper is absorbing moisture much more than gold cardboard while it is being placed. If the temperature is not set properly, the laminated products will not have light, especially on wet and winter days.

Color box common surface printing

1. standard printing

the most basic 4-color printing method, CMYK

2. Upgraded printing ensures the creation of exceptional visual effects on all varieties of color packages, labels, publications, and advertising prints.

a. When a designed graphic is engraved on a metal plate and then stamped onto the material to be foil stamped, the process is known as foil stamping. Zinc plate, magnesium plate, and copper plate are often the materials used for foil stamping.

A UV curing lamp must be paired with ink that contains a photosensitizer for the Ultra-Violet Ray printing technique to successfully dry and cure the ink through ultraviolet light. frequently used to draw attention to the LOGO and important information like the lumen count, passed certification, usw.

c. The printed picture has a sense of granularity, increasing the luster and brightness of the pattern, more exquisite than the previous pattern, better visual effect, and more focused. Dazzling: Dazzling heat transfer pearl film, black ink layer with pearl layer, pearl powder particles are wrapped to form a sense of granularity, can produce a dichromatic effect.

d. Zusätzlich, there are embossing, Laser, embossing printing, usw.

Shipping color box points

We will assist customers in selecting the ideal packaging for each new product’s initial shipment.

1. Inserting

The ideal technique to install color boxes with airplane holes is in pairs. We need to think about whether it is practical to invert the product for the top and bottom or left and right pairs.

2. Tightness

To better protect the box, the outer box is a little tighter. The color box will easily be damaged during transit if the outer box has too much room since it will wobble.

3. We can add plastic corners for e-commerce clients with strict standards.

To protect the four corners of the outer box that are most likely to be bumped, we typically add triangle plastic for e-commerce customers.

The following details regarding order follow-up should be taken into consideration for the color boxes.

1. All color boxes should be proofed before printing to ensure that the design is clear and the box size is accurate.

2. The color box with printing should be more attractive, pay attention to the sealing location, and be placed in the back of the non-display.

3. The color box’s airplane hole size should be appropriate for the customer’s needs in the destination nation.

4. The certification icons must be updated in accordance with the requirements of the customer’s destination country; those that are no longer applicable must be removed promptly; and those that have been updated must be used.

5. The wordsMade in China” oder “Made in the P.R.C.must be printed on each piece of packaging.

The color box has FSC certification.

The official video at https://www.youtube.com/watch?v=sxxGLwVOMiM describes FSC certification in great detail.

The purpose of FSC certification is to support ethical worldwide forest management. It acknowledges unbiased third-party certification bodies that can accredit forest management organizations and businesses that process forest products in accordance with FSC standards.

FSC stands out from other forest certification systems because it offers the highest level of protection for natural forests and endangered species.

Paper products with an FSC certification are more environmentally beneficial, to put it simply!

Hinterlasse eine Antwort

Ihre E -Mail -Adresse wird nicht veröffentlicht. Erforderliche Felder sind markiert *